Authentication and Session Monitoring

In this section:

Authentication Types

FindFace Multi provides the following authentication types:

• password: standard login/password authentication. Enabled by default.

• face: authentication is possible only by the user’s face.

• face_or_password: authentication is possible using either a face or login/password.

• face_and_password: two-factor authentication. After a face is successfully recognized, the user must enter their credentials.

Important

For all the authentication types based on face recognition, you need the following configuration:

• standalone liveness service (findface-liveness-api)

• HTTPS

Important

Before using face recognition for authentication, you need to attach photos to users’ profiles and equip their workplaces with webcams.

Note

You can enable a work session monitoring for the authentication types face and face_or_password. In this case, the system will be periodically renewing the session after verifying that the face of a person at the workplace matches the user’s face that has logged in (see Configure Authentication and Session Renewal for details).

Tip

FindFace Multi also provides a certificate-based authentication that is configured independently. Contact our support team for details (support@ntechlab.com).

Configure Authentication and Session Renewal

To configure authentication and session monitoring, do the following:

1. Open the /opt/findface-multi/configs/findface-multi-legacy/findface-multi-legacy.py configuration file. Find the FFSECURITY and FFSECURITY_AUTH_CONFIG sections.

   sudo vi /opt/findface-multi/configs/findface-multi-legacy/findface-multi-legacy.py
   
   FFSECURITY = {
       # auth config
       # available options: face, password, face_and_password, face_or_password
       'AUTH_TYPE': 'face_or_password',
       # 180 days by default
       'MAXIMUM_SESSION_LENGTH': 15552000,
       ...
       }
   
   ...
   # - FindFace Security authorization configuration dictionary -
   
   FFSECURITY_AUTH_CONFIG = {
       'FACE_AUTH_CONFIDENCE': 0.740,  # FAR = 2.5E-09  # model: [kiwi_320]
       # 3 settings below are for front-end only
       # session renew works only with face or face_or_password authorization type
       'NEED_SESSION_RENEW': False,
       'RENEW_SESSION_INTERVAL': 0,
       'MAXIMUM_RENEW_ATTEMPTS': 2,
   }
   

2. In the FFSECURITY section, set the following authentication parameters:

   • AUTH_TYPE: authentication type. Available options: face, password, face_and_password, face_or_password.

   • MAXIMUM_SESSION_LENGTH: the maximum session length, in seconds. After a session expires, the user will be automatically logged out unless the session is renewed.

3. In the FFSECURITY_AUTH_CONFIG section, set the following authentication and session monitoring parameters:

   • FACE_AUTH_CONFIDENCE: after a face in the webcam video is detected as alive, the system checks this face against the database of user photos with this confidence threshold.

   • NEED_SESSION_RENEW: if True, a session can be renewed and prolonged by the time equal to MAXIMUM_SESSION_LENGTH, after verifying that the face of a person at the workplace matches the user’s face that has logged in.

   • RENEW_SESSION_INTERVAL: period in seconds before the expected time of the session expiry, during which the system will attempt to renew the session by enabling the webcam and verifying the user’s face.

   • MAXIMUM_RENEW_ATTEMPTS: the number of user verification attempts. The attempts occur in a row during the renewal interval.

   Note

   A verification attempt takes about 3 seconds to complete.

   Tip

   We recommend you to set up the monitoring parameters so that MAXIMUM_RENEW_ATTEMPTS multiplied by the attempt duration is less than RENEW_SESSION_INTERVAL. Otherwise, the system will extend the renewal interval x2, x3, and so on, subject to the number of attempts.

4. Restart the findface-multi-findface-multi-legacy-1 container.

   sudo docker container restart findface-multi-findface-multi-legacy-1
   

Log out All Users

To automatically log out all users, execute the following command on the FindFace Multi principal server console:

sudo docker exec findface-multi-findface-multi-legacy-1 /opt/findface-security/bin/python3 /tigre_prototype/manage.py logout_all_users

Tip

This command comes in handy when switching to a different authentication type.